Discussion:
[srobo-devel] Token Building
Tom Leese
2016-02-03 17:25:19 UTC
Permalink
Hi,

At the following two Southampton tech days we’re most likely going to be building a make shift arena out of tables and other things we can find around the place.

Therefore this is a good opportunity to test how we should build the tokens or even build some competition-ready tokens well in advance of the competition.

So, do we have any progress on this front and any ideas about we are going to be building the tokens?

Tom
--
You received this message because you are subscribed to the Google Groups "Student Robotics Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to srobo-devel+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Thomas Scarsbrook
2016-02-03 23:24:46 UTC
Permalink
Hi,
Post by Tom Leese
At the following two Southampton tech days we’re most likely going to be building a make shift arena out of tables and other things we can find around the place.
Having an arena, or partial arena, at a tech day is a brilliant idea,
and one that's been floating around for a number of years now.

However I fail to see why, now that the arena is made out of
~30cmx~150cm panels[0], that we don't just use a number of these. We
have enough to set up 8 arena corners in parallel, this means we can
easily do a couple of them at various tech days around the country even
if they are running on the same day. Transporting the sections to the
right place at the right time may be a tad interesting, but shouldn't be
too difficult.

Scarzy

[0] I didn't look them up, this is an approximation based on vague memory
--
You received this message because you are subscribed to the Google Groups "Student Robotics Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to srobo-devel+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Tom Leese
2016-02-04 07:46:30 UTC
Permalink
Hi Scarzy,
However I fail to see why, now that the arena is made out of ~30cmx~150cm panels[0], that we don't just use a number of these. We have enough to set up 8 arena corners in parallel, this means we can easily do a couple of them at various tech days around the country even if they are running on the same day. Transporting the sections to the right place at the right time may be a tad interesting, but shouldn't be too difficult.
We did want to do this originally, but we simply don’t have the money/resources in Southampton to hire a van to transport them.

Tom
--
You received this message because you are subscribed to the Google Groups "Student Robotics Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to srobo-devel+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Thomas Scarsbrook
2016-02-04 08:45:48 UTC
Permalink
Hi,
We did want to do this originally, but we simply don’t have the
money/resources in Southampton to hire a van to transport them.
Where are they at the moment?

As only ~6 should be needed to construct just a corner of it you should be
able to fit them in a normal car, if any of you have access to one?

Scarzy
--
You received this message because you are subscribed to the Google Groups "Student Robotics Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to srobo-devel+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Tom Leese
2016-02-04 08:46:52 UTC
Permalink
Hi,
Post by Thomas Scarsbrook
Where are they at the moment?
They are in storage, presumably near Newbury.
Post by Thomas Scarsbrook
As only ~6 should be needed to construct just a corner of it you should be able to fit them in a normal car, if any of you have access to one?
The only person I know is Murray, I’ll get in touch with him.

Tom
--
You received this message because you are subscribed to the Google Groups "Student Robotics Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to srobo-devel+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Loading...